TM 1-1520-238-23
2-454.6
Change 2
2.126C. TRANSMISSION ACCESS PANEL DOOR L210 OR R210 REMOVAL/INSTALLATION – continued
2.126C.3. Removal
a. Remove transmission access panel doors (1)
from transmission access panel (2).
(1) Unlock fastener (3) from panel (2).
(2) Remove three screws (4), washers (5), and
self-locking nuts (6) from door (1) and panel
(2).
(3) Remove door (1).
2.126C.4. Cleaning
a. Wipe door and panel mounting surface with a
clean rag.
2.126C.5. Inspection
a. Check panel nutplates.
(1) Check for loose or missing rivets, and
stripped threads (TM 1-1500-204-23).
(2) Check for cracks. None allowed.
(3) Check for corrosion (para 1.49).
b. Check doors for corrosion (para 1.49).
c. Check door and panel mating surface for
damaged EMI conductive coating. Repair door
and mating surface (para 2.34).
2.126C.6. Installation
a. Install door (1) on panel (2).
(1) Install three screws (4) through door (1), pan-
el (2) and washers (5).
(2) Install three self-locking nuts (6) on screws
(4).
(3) Lock fastener (3) in panel (2).
b. Inspect (QA).
END OF TASK
M04-5109-2
3
1
2
4
6
5
M04-5109-3
3
1
2
4
6
5
