TM 1-1520-238-23
2-454.8
Change 2
2.126D. TAIL ROTOR DRIVE SHAFT FAIRING R410 OR R475 REMOVAL/INSTALLATION continued
2.126D.3. Removal
a. Remove tail rotor drive shaft access fairing (1)
from tailboom (2).
(1) Unlock seven or six fasteners (R410 or R475)
(3) from tailboom (2).
(2) Remove 16 or 14 screws (R410 or R475) (4)
and washers (5) from fairing (1) and tailboom
(2).
(3) Remove fairing (1).
2.126D.4. Cleaning
a. Wipe fairing and tailboom mounting surface a
clean rag.
2.126D.5. Inspection
a. Check tailboom nutplates for loose or missing
rivets
and
stripped
threads
(TM 1-1500-204-23).
b. Check fairing and tailboom for corrosion (para
1.49).
c. Check fairing and tailboom for cracks. None
allowed.
d. Check fairing and tailboom mating surface for
damaged EMI conductive coating. Repair door
and mating surface (para 2.34).
e. Check for damage, tears, or breaks in EMI
tape. Repair damage (para 2.28).
2.126D.6. Installation
a. Install fairing (1) on tailboom (2).
(1) Install 16 or 14 screws (R410 or R475) (4)
and washers (5) through fairing (1) in tail-
boom (2).
(2) Lock seven or six fasteners (R410 or R475)
(3) in tailboom (2).
b. Inspect (QA).
END OF TASK
M04-5111-2
2
3
4
5
1
M04-5111-3
2
3
4
5
1
VIEW
ROTATED