TM 1-1520-238-23
2-599
2.163.
PILOT/CPG CANTED FRAME BEARING REPLACEMENT – continued
(4) Apply a fillet of sealing compound between
faying edge of bearing (1) outer race and
housing (2), approximately 0.125 INCH wide.
Remove excess sealing compound. Use
sealing compound (item 175, App F) and
brush (item 34, App F).
NOTE
Restaking of bearing housing shall be
limited to one time only.
(5) Stake housing (2) over outer race of bearing
(1). Stake at four equally spaced points
around bearings (1) on both sides of housing
(2) (TM 55-1500-322-24). Use staking tool
kit.
(6) Check that dried sealing compound does not
interfere with rotation of bearings (1).
(7) Check for smooth fillets of sealing compound.
b. Inspect (QA).
c. Install pilot and/or CPG armored crew seat
(para 2.161).
END OF TASK
2
1
1
SEALING
COMPOUND
STAKE
(4 PLACES ON
BOTH SIDES)
SEALING
COMPOUND
2
STAKE
(4 PLACES ON
BOTH SIDES)
M04-3972-4
