TM 1-1520-238-23
2-601
2.164.
PILOT/CPG ARMORED CREW SEAT HANDLE ASSEMBLY REPLACEMENT – continued
2.164.3. Removal
a. Enter pilot/CPG station (para 1.56). Observe
all safety precautions.
b. Remove handle assembly (1) from armored
swing panel (2).
(1) Hold two screws (3). Remove self-locking
nuts (4) and washers (5).
(2) Remove two screws (3) and finishing wash-
ers (6).
(3) Remove and discard handle (1).
2.164.4. Cleaning
a. Clean attaching area of handle (para 1.47).
2.164.5. Inspection
a. Check panel for cracks. None allowed.
2.164.6. Installation
a. Install new handle (1) on panel (2). Torque two
nuts (4) to 25 INCH-POUNDS.
(1) Install two screws (3) and washers (6)
through panel (2) and handle (1).
(2) Hold two screws (3). Install washers (5) and
nuts (4).
(3) Torque two nuts (4) to 25 INCH-POUNDS.
Use torque wrench.
(4) Check operation by pulling handle (1) to re-
lease panel (2).
b. Inspect (QA).
END OF TASK
M04-1267-2
2
4
5
4
5
1
6
3
6
3
M04-1267-3
4
5
4
5
1
6
3
6
3
2
