TM 1-1520-238-23
2-603
2.165.
PILOT/CPG ARMORED CREW SEAT WING PANEL (ARMORED SWING PANEL)
REMOVAL/INSTALLATION – continued
2.165.3. Removal
a. Enter pilot or CPG station (para 1.56). Observe
all safety precautions.
b. Remove armored swing panel (1) from ar-
mored crew seat (2).
(1) Hold shear bolt (3). Remove self-locking nut
(4) and washer (5).
(2) Remove bolt (3), three washers (6), and
washer (7) from panel (1).
(3) Release panel (1) by pushing handle assem-
bly (8) and sliding panel (1) forward.
(4) Remove panel (1) from seat (2).
2.165.4. Cleaning
a. Wipe removed and attaching parts and sur-
faces with a clean rag.
2.165.5. Inspection
a. Check attaching area for cracks and corro-
sion (para 2.11).
2.165.6. Installation
a. Install panel (1) in seat (2).
(1) Hold handle (8) down.
(2) Aline and position panel (1) under upper sup-
port of seat (2). Release handle (8) to hold
panel (1) in place.
(3) Install bolt (3), three washers (6), and washer
(7) from outboard side of panel (1).
(4) Hold bolt (3). Install washer (5) and nut (4).
(5) Tighten nut (4) then back off to allow panel (1)
to pivot freely.
b. Inspect (QA).
END OF TASK
2
1
4
6
3
8
1
2
7
5
M04-3702-2
