TM 1-1520-238-23
2-608
2.167.
PILOT/CPG ARMORED CREW SEAT M-43 BLOWER MOUNT BRACKET BONDING – continued
2.167.6. Repair
a. Bond two blower mount brackets (7) on panel
(1).
(1) Mix adhesive according to the manufacturer’s
instructions and apply to brackets (7) and
panel (1) mating surfaces. Use adhesive
(item 2, App F).
(2) Use slider plate (8) assembled to brackets (7)
as locator template.
(3) Place two brackets (7) on panel (1) in its origi-
nal bonded position and hold using clamp. Do
not over clamp. Use C clamp.
(4) Use clamp to maintain contact for a cure time
of 24 HOURS at room temperature.
(5) Apply only enough pressure to force a small
amount of adhesive to squeeze out from un-
der edges of brackets (7).
b. Inspect (QA).
2.167.7. Installation
a. Install panel (1) on seat (2). Torque nuts (3) to
120 INCH-POUNDS.
(1) Position panel (1) on seat (2).
(2) Install nine bolts (5) through washers (6),
panel (1), and seat (2).
(3) Install washers (4) and new nuts (3) on bolts
(5).
(4) Torque nuts to 120 INCH-POUNDS. Use
torque wrench.
b. Inspect (QA).
GO TO NEXT PAGE
8
7
7
1
M04-5059-3
2
1
4
3
6
5
M04-5059-4
