TM 1-1520-238-23
2-605
2.166.
PILOT/CPG ARMORED CREW SEAT WING PANEL SLIDER PLATE
REMOVAL/INSTALLATION – continued
b. Detach connector (1) P993 (pilot) or P997
(CPG) from receptacle (2) (A148)J1 (pilot) or
(AJ147)J1 (CPG) on slider plate (3).
c. Remove plate (3) from two brackets (4).
(1) Remove four screws (5), washers (6), and
nuts (7) from two brackets (4).
(2) Remove plate (3) from two brackets (4).
2.166.4. Cleaning
a. Wipe removed and attaching parts and sur-
faces with a clean rag.
2.166.5. Inspection
a. Check connectors and receptacles for dam-
age (para 2.11).
b. Check attaching area for cracks and corro-
sion (para 2.11).
2.166.6. Installation
a. Install plate (3) on two brackets (4). Torque four
nuts (6) to 25 INCH-POUNDS.
(1) Peel existing laminated shims (8) as required
from lower bracket (4) so that plate (3) attains
a friction fit.
(2) Slide plate (3) on two brackets (4).
(3) Install four screws (5), washers (6), and nuts
(7) in plate (3) and two brackets (4).
(4) Torque four nuts (6) to 25 INCH-POUNDS.
Use torque wrench.
b. Attach connector (1) P993 (pilot) or P997
(CPG) to receptacle (2) (A148)J1 (pilot) or
(A147)J1 (CPG) on plate (3).
c. Inspect (QA).
END OF TASK
3
4
6
7
4
8
1
5
5
2
7
6
M04-4122-2
3
4
6
7
4
8
1
5
5
2
7
6
M04-4122-3
