TM 1-1520-238-23
Change 7
3-15
3.5.
MAIN LANDING GEAR JACK PAD ADAPTER REMOVAL/INSTALLATION
3.5.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
3.5.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Light duty laboratory apron (item 27, App H)
Chemical protective gloves (item 154, App H)
Multimeter (item 215, App H)
Adjustable air filtering respirator (item 262, App H)
30 - 150 inch-pound 1/4-inch drive click type torque
wrench (item 435, App H)
Materials/Parts:
Epoxy primer coating kit (item 78, App F)
Personnel Required:
67R
Attack Helicopter Repairer
68X
Armament/Electrical System Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 1-1520-264-23
TM 55-1500-323-24
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
NOTE
This task is typical for left and/or right
side landing gear assemblies except as
noted.
3.5.3. Removal
a. Remove jack pad adapter (1) from trailing arm
assembly (2).
(1) Hold bolt (3). Remove nut (4) and washer (5).
(2) Remove bolt (3), static ground bracket (6)
(left trailing arm only), and adapter (1).
GO TO NEXT PAGE
M04-043-1
1
6
5
4
2
3
M04-043-2A
