TM 1-1520-238-23
3-16
Change 7
3.5.
MAIN LANDING GEAR JACK PAD ADAPTER REMOVAL/INSTALLATION – continued
3.5.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
3.5.5. Inspection
a. Check adapter for nicks, or scratches. None
allowed.
b. Check adapter for corrosion (para 1.49).
c. Check adapter for cracks.
(1) If cracks are suspected, perform nondestruc-
tive inspection (TM 1-1520-264-23).
3.5.6. Installation
a. Install adapter (1) in trailing arm (2). Torque nut
(4) to 60 INCH-POUNDS.
(1) Aline adapter (1) in trailing arm (2).
(2) Coat bolt (3) with epoxy primer coating kit
(item 78, App F). Install wet.
(3) Aline bracket (6) (left trailing arm only).
(4) Install bolt (3) through bracket (6) and trailing
arm (2).
(5) Hold bolt (3). Install washer (5) and nut (4).
Torque nut (4) to 60 INCH-POUNDS. Use
torque wrench.
b. Perform electrical bond check on cable as-
sembly (TM 55-1500-323-24).
(1) Bond shall be 1.00 OHM or less. Use
multimeter.
c. Inspect (QA).
END OF TASK
1
6
5
4
2
3
M04-043-3
