TM 1-1520-238-23
3-111
3.32.
TAIL LANDING GEAR ACTUATING CYLINDER REMOVAL/INSTALLATION – continued
3.32.3. Removal
a. Remove hose (1) from actuating cylinder (2).
(1) Hold boss nipple (3). Remove nut (4). Use
pail to catch hydraulic fluid spills.
(2) Expel hydraulic fluid from actuator (2) by
moving lock release handle (5) up and down
several times. Use pail to catch fluid.
(3) Leave handle (5) up.
b. Remove cylinder (2) and switch tail bracket (6)
from trailing arm (7).
(1) Remove lockwire from two bolts (8).
(2) Remove two bolts (8) and washers (9).
(3) Remove bracket (6).
(4) Lay bracket (6) on trailing arm (7).
(5) Lift cylinder (2) from socket (10).
3.32.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
3.32.5. Inspection
a. Check removed and attaching parts for dam-
age. None allowed.
b. Check removed and attaching parts for corro-
sion (para 1.49).
GO TO NEXT PAGE
M04-025-2
8
9
6
2
10
5
3
4
1
7
