TM 1-1520-238-23
3-112
3.32.
TAIL LANDING GEAR ACTUATING CYLINDER REMOVAL/INSTALLATION continued
3.32.6. Installation
a. Install cylinder (2) and bracket (6) on trailing
arm (7). Torque two bolts (8) to 30 INCH-
POUNDS.
(1) Install two bolts (8) and washers (9) through
bracket (6) and cylinder (2) mounting holes.
(2) Install cylinder (2) and bracket (6) on socket
(10) with wheel lock fuse pin (11) centered in
socket (10) on trailing arm (7).
(3) Install two bolts (8) and washers (9) in mount-
ing holes of trailing arm (7). Torque bolts (8)
to 30 INCH-POUNDS. Use torque wrench.
(4) Lockwire two bolts (8). Use wire (item 224,
App F).
b. Check free movement of pin (11).
(1) Move handle (5) up and down.
(2) Check that pin (11) does not rub or bind.
(3) If pin (11) rubs or binds, go to steps c thru e. If
pin (11) does not bind, go to step f.
c. Loosen two bolts (12) installed in housing
(13).
(1) Hold two bolts (12). Loosen nuts (14).
d. Adjust housing (13) to pin (11) in socket (10).
e. Torque two nuts (14) to 150 INCH-POUNDS.
(1) Hold two bolts (12). Torque nuts (14) to 150
INCH-POUNDS. Use torque wrench.
GO TO NEXT PAGE
M04-025-3
7
6
9
2
8
11
10
11
5
M04-025-4
14
12
10
13
FULL UP