TM 1-1520-238-23
4-284
4.87.
LINK ASSEMBLY AFT ENGINE MOUNT REMOVAL/INSTALLATION – continued
c. Position No. 1 engine (para 4.49) or No. 2 en-
gine (para 4.53) in nacelle.
d. Connect No. 1 engine (para 4.50) or No. 2 en-
gine (para 4.54) forward lower engine mount.
e. Connect No. 1 engine (para 4.51) or No. 2 en-
gine (para 4.55) forward inboard engine mount
and aft inboard engine mount.
f. Lower No. 1 engine (para 4.51) or No. 2 engine
(para 4.55) until full load is on supports.
g. Adjust aft link assembly (4).
(1) Adjust turnbuckle (14) until aft lower engine
mount (18) is alined with rod assembly (17).
NOTE
When installing support pin ensure a pos-
itive retention with a slip fit condition ex-
ists. Support pin must install freely with
no contact to aft lower engine mount sup-
port.
(2) Insert support pin (3) through clevis (4), aft
lower engine mount (18), and rod assembly
(17).
h. Remove No. 1 engine (para 4.3) or No. 2 engine
(para 4.8).
i. Remove aft link assembly (4) from nacelle (5).
(1) Hold bolt (7). Remove nut (8) and teflon
washer (9).
(2) Support link (4). Remove bolt (7) and washer
(10) from nacelle (5).
(3) Remove link (4).
GO TO NEXT PAGE
M04-3694-9
3
17
4
18
M04-3694-10
14
M04-3694-11
7
10
5
4
9
8
