TM 1-1520-238-23
4-522
4.157.
ENGINE LOAD DEMAND SPINDLE CABLE SUPPORT REMOVAL/INSTALLATION – continued
c. Install cable (9) in support (20). Torque nuts
(37) and (26) to 90 INCH-POUNDS.
(1) Center nut (37) on threaded area of cable (9).
(2) Install spacer (28) on cable (9).
(3) Install cable (9) through lower retainer (32).
(4) Install spacer (27) on cable (9).
(5) Hand tighten nut (26) until spacer (27) just
contacts retainer (32).
(6) Hold cable flats (25). Torque nuts (37) and
(26) to 90 INCH-POUNDS. Use torque
wrench and crowfoot.
d. Install cable (1) in support (20). Torque nuts
(38) and (22) to 90 INCH-POUNDS.
(1) Center nut (38) on threaded area of cable (1).
(2) Install spacer (24) on cable (1).
(3) Install cable (1) through upper retainer (32).
(4) Install spacer (23) on cable (1).
(5) Hand tighten nut (22) until spacer (23) just
contacts retainer (32).
(6) Hold cable flats (21). Torque nuts (38) and
(22) to 90 INCH-POUNDS. Use torque
wrench and crowfoot.
GO TO NEXT PAGE
37
M04-2319-15
27
32
25
26
9
20
9
32
28
VIEW ROTATED
20
M04-2319-16
32
1
38
21
24
2223
32
VIEW ROTATED
