TM 1-1520-238-23
4-535
4.160.
NO. 2 ENGINE POWER AVAILABLE SPINDLE CABLE REMOVAL (PILOT TO CPG) – continued
h. Remove rod end (22) from pilot No. 2 power
lever (23).
(1) Remove and discard cotter pin (24).
(2) Hold bolt (25). Remove nut (26).
(3) Remove bolt (25) from rod end (22) and pow-
er lever (23).
(4) Remove rod end (22).
i. Remove rod end (22) from cable (6).
(1) Hold rod end (22). Loosen nut (27).
(2) Remove rod end (22) and nut (27) from cable
(6).
j. Remove cable (6) from bracket (28).
(1) Remove two bolts (29) and washers (30) from
retainer (31).
(2) Remove cable (6) and retainer (31).
4.160.4. Cleaning
a. Clean rod end, cable support, and support
bracket (para 1.47).
4.160.5. Inspection
a. Check rod end for thread damage and bearing
surface scars. None allowed.
b. Check cable support and support bracket for
cracks. None allowed.
c. Check rod end, cable support, and support
bracket for corrosion (para 1.49).
END OF TASK
25
22
27
6
26
M04-1193-8
24
23
6
28
M04-1193-9
29
30
29
30
31
