TM 1-1520-238-23
4-575
4.167.
PILOT POWER QUADRANT DISASSEMBLY/ASSEMBLY (AVIM) – continued
4.167.8. Adjustment
a. Adjust power lever (10) friction to 9 POUNDS.
(1) Set left power lever (10) to FLY, and right
power lever (14) to IDLE.
(2) Lock friction lever (6) in full forward position.
(3) Attach scale to left power lever (10) through
screw hole (86). Check friction.
(a) If friction is more than 9 POUNDS, loosen
nut (3).
(b) If friction is less than 9 POUNDS, tighten
nut (3).
(4) Repeat step a(3) until power lever friction is
adjusted to 9 POUNDS.
NOTE
Power lever handle has spring tension
from the trigger release spring. To pre-
vent loss of spring, hold spring while
installing handle.
(5) Install right power handle (13) on power lever
(14).
(a) Hold spring (16). Install handle (13) on
lever (14).
(b) Hold handle (13). Install screw (15).
(6) Install left power handle (9) on power lever
(13).
(a) Hold spring (12). Install handle (9) on le-
ver (13).
(b) Hold handle (9). Install screw (11).
GO TO NEXT PAGE
SCALE
M04-3926-32
2
10
14
6
3
86
9
12
15
13
11
16
14
13
M04-3926-33
