TM 1-1520-238-23
4-715
4.194.
PILOT POWER QUADRANT PANEL – NO. 2 ENGINE INTERLOCK SWITCH
REMOVAL/INSTALLATION (AVIM) – continued
4.194.3. Removal
a. Remove bracket (1) from panel (2).
(1) Remove four screws (3), washers (4), and
locknuts (5).
(2) Remove lacing tape as required.
b. Remove interlock switch (6) from panel (2).
(1) Remove two nuts (7) and washers (8).
(2) Remove switch actuator (9), switch (6),
spacer (10), two washers (11), and screws
(12).
c. Detach wires (13) and (14).
(1) Identify and remove wire (13) from RTR BRK
switch (15).
(a) Remove screw (16), lockwasher (17),
and terminal lug (18).
(b) Remove wire (13).
(2) Identify and detach wires (14) and (19) from
wire cap (20) (TM 55-1500-323-24). Discard
wire cap (20).
(3) Do not remove wire cap (20) from wire (21) if
switch is being removed for other mainte-
nance.
GO TO NEXT PAGE
4
M04-3331-2
5
3
1
2
M04-3331-3
21
6
14
9
10
6
11
12
2
13
8
7
M04-3331-4
16
17
18
6
21
14
15
20
19
13
20
