TM 1-1520-238-23
4-722
4.196.
CPG POWER QUADRANT NO. 1 ENGINE OUT DISABLE SWITCH REMOVAL/INSTALLATION
(AVIM) continued
c. Remove No. 1 engine out disable switch (8)
from CPG power quadrant (9).
(1) Remove two locknuts (10) and lockwashers
(11).
(2) Remove switch (8) switch actuator (12)
spacer (13) washers (14), and screws (15).
(3) Remove lacing tape as required.
(4) Pull wires of switch (8) through grommet (16)
in shaft support plate (17).
(5) Remove switch (8).
4.196.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
4.196.5. Inspection
a. Check removed and attaching parts for
cracks. None allowed.
b. Check wires for cuts, cracks, and damaged
connectors (TM 55-1500-323-24).
c. Check removed and attaching parts for corro-
sion (para 1.49).
GO TO NEXT PAGE
8
12
19
1514
17
13
1110
9
16
8
17
M04-3341-2