TM 1-1520-238-23
4-726
4.197.
CPG POWER QUADRANT NO. 2 ENGINE OUT DISABLE SWITCH REMOVAL/INSTALLATION
(AVIM) – continued
c. Remove No. 2 engine out disable switch (9)
from CPG power quadrant (10).
(1) Remove two locknuts (11) and lockwashers
(12).
(2) Remove switch (9) switch actuator (13)
spacer (14) washers (15), and screws (16).
(3) Remove lacing tape as required.
(4) Pull wires of switch (9) through grommet (17)
in shaft support plate (18).
(5) Remove switch (9).
4.197.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
4.197.5. Inspection
a. Check mounting surfaces and attaching parts
for cracks. None allowed.
b. Check wires for cuts, cracks, and damaged
connectors (TM 55-1500-323-24).
c. Check mounting surfaces and attaching parts
for corrosion (para 1.49).
GO TO NEXT PAGE
10
17
11
14
16
15
18
13
129
21
18
M04-3370-2
9
18
