TM 1-1520-238-23
5-86
5.15.
MAIN ROTOR BLADE ELECTROSTATIC DISCHARGER DISASSEMBLY/ASSEMBLY continued
e. Install fitting (3) between brackets (4) and
bracket (5).
NOTE
Ensure adhesive does not get into the
rivet hole in brackets or fitting.
(1) Apply a thin, uniform coat of adhesive to
mounting surfaces of fitting (3). Use adhesive
(item 19, App F) and brush (item 34, App F).
(2) Position fitting (3) between brackets (5) and
(4).
(3) Install new rivet (6) through bracket (5), fitting
(3), and bracket (4) (TM 1-1500-204-23).
f. Install stud (2) in fitting (3).
g. Install discharger (1) in stud (2).
(1) Hold stud (2). Install discharger (1) in stud (2).
Use strap wrench.
h. Inspect (QA).
END OF TASK
M04-2308-12
5
6
4
3
M04-2308-13
3
2
M04-2308-14
1
2