TM 1-1520-238-23
Change 1
6-460.7/(6-460.8 blank)
6.106B. TRANSMISSION REMOVAL – PREPARATION FOR INSTALLATION – continued
b. Prepare to remove transmission (9) from ship-
ping container (2).
(1) Remove four nuts (10) and washers (11) from
securing rods (12).
(2) Loosen securing nut (13) on crossbar (14).
(3) Remove crossbar (14).
c. Install transmission sling. Torque two sling
bolts (15) to 250 INCH-POUNDS.
(1) Aline holes in channel (16) over top holes in
transmission (9). Use sling set kit.
(2) Install two bolts (15) through channel (16) .
(3) Torque two bolts (15) to 250 INCH-POUNDS.
Use torque wrench.
(4) Attach crane cable hook (8) to shackle (17).
(5) Lift transmission (9) from container (2) with
crane.
d. Install transmission (para 6.107).
END OF TASK
2
14
10
11
12
13
M04-5099-3
9
M04-5099-4
17
16
15
8
9
2
