TM 1-1520-238-23
6-473
6.112.
TRANSMISSION INSTALLATION – CONNECT LEFT SIDE AREA – continued
a. If transmission was replaced, install check
valve (para 6.80).
b. Connect left lube oil inlet hose (1) to check
valve (2). Torque nut (3) to 345 INCH-POUNDS.
(1) Install nut (3) on valve (2).
(2) Hold valve (2). Use open end wrench.
(3) Torque nut (3) to 345 INCH-POUNDS. Use
crowfoot and torque wrench.
c. Connect left lube oil outlet hose (4) to cou-
pling body (5).
(1) Aline sleeve (6) with body (5).
(2) Turn sleeve (6) clockwise until firmly seated
and locking teeth fully engage.
d. Install clamps (7) and (8).
(1) Install screw (9), washer (10), and nut (11).
e. Install oil pressure switch (para 6.78).
f. If transmission was replaced, install left hy-
draulic pump (para 7.4).
g. Connect left hydraulic pump seal drain hose
(12) to drain fitting (13).
(1) Slide hose (12) over fitting (13).
(2) Tighten clamp (14).
h. Connect left hydraulic pump case drain hose
(15) to union (16).
(1) Install nut (17) on union (16).
(2) Hold union (16). Tighten nut (17).
GO TO NEXT PAGE
2
3
1
M04-2971-2
M04-2971-3
5
7
6
4
11
10
8
9
M04-2971-5
15
16
17
12
13
14
