TM 1-1520-238-23
6-477
6.113.
TRANSMISSION INSTALLATION – CONNECT RIGHT SIDE AREA – continued
i. Install two clamps (19) and (20) on bracket
(21).
(1) Install screw (22), washer (23), clamps (19),
and (20) in bracket (21).
j. If transmission was replaced, install right hy-
draulic pump (para 7.58).
k. Install right hydraulic pump outlet hose (24)
on union (25). Torque nut (26) to 245 INCH-
POUNDS.
(1) Install nut (26) on union (25).
(2) Hold union (25). Torque nut (26) to 245 INCH-
POUNDS. Use crowfoot and torque wrench.
l. Install right hydraulic pump case drain hose
(27) on union (28).
(1) Install nut (29) on union (28).
(2) Hold union (28). Tighten nut (29).
m. Install right hydraulic pump inlet hose (30) on
union (31). Torque nut (32) to 345 INCH-
POUNDS.
(1) Install nut (32) on union (31).
(2) Hold union (31). Torque nut (32) to 345 INCH-
POUNDS. Use crowfoot and torque wrench.
n. Inspect (QA).
o. Install right input quill drain tube (33) on drain
fitting (34).
(1) Slide tube (33) over fitting (34).
(2) Tighten clamp (35).
GO TO NEXT PAGE
19
23
22
20
21
M04-2972-10
27
26
32
31
29
24
30
25
28
M04-2972-9
M04-2972-7
34
35
33
