TM 1-1520-238-23
7-146
7.41.
COLLECTIVE SERVOCYLINDER REMOVAL – continued
y. Remove tube clamp (51).
(1) Remove screw (52) and washer (53).
(2) Remove halves of tube clamp (51).
CAUTION
Improper removal of self-retaining bolt
will damage bolt and pin.
z. Remove self-retaining bolt (54) from pin (55).
(1) Remove and discard cotter pin (56).
(2) Hold pin (55). Use box wrench.
(3) Loosen bolt (54) one-half turn. Use box
wrench.
(4) Press button (57) in center of bolt (54).
(5) Keeping button (57) pressed, remove bolt
(54) from pin (55).
aa. Remove servocylinder (9) from bracket (58).
(1) Remove pin (55).
ab. Remove servocylinder (9) from aircraft.
(1) One person hold servocylinder upper end
and a second person lift lower end.
(2) Carefully remove servocylinder (9).
GO TO NEXT PAGE
53
52
M04-794-10
9
58
51
56
55
57
ROTATED FOR
CLARITY
54
51
