TM 1-1520-238-23
7-151
7.42.
COLLECTIVE SERVOCYLINDER INSTALLATION – continued
b. Install adapter (5) on servocylinder (3). Torque
nut (6) 30 to 40 INCH-POUNDS.
(1) Position adapter (5) on servocylinder (3).
(2) Install washer (7) and nut (6).
(3) Hold adapter (5). Torque nut (6) to 30 INCH-
POUNDS. Use torque wrench.
(4) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(5) Install new cotter pin (8).
c. Install control tube (9) on adapter (5). Torque
nut (10) 30 to 40 INCH-POUNDS.
(1) Install one washer (11) on adapter (5).
(2) Position tube (9) on adapter (5).
(3) Install one washer (11) and nut (10) on adapt-
er (5).
(4) Hold adapter (5). Torque nut (10) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (12).
GO TO NEXT PAGE
8
12
10
11
5
11
9
3
7
6
M04-795-15
