TM 1-1520-238-23
7-147
7.41.
COLLECTIVE SERVOCYLINDER REMOVAL continued
NOTE
Perform steps ac. and ad. off helicopter if
replacing servocylinder. Go to paragraph
7.41.4 if removing servocylinder for rein-
stallation.
ac. Remove control tube (59) and adapter (60)
from servocylinder (9).
(1) Remove and discard cotter pin (61).
(2) Hold adapter (60). Remove nut (62).
(3) Remove control tube (59) and two washers
(63).
(4) Remove and discard cotter pin (64).
(5) Hold adapter (60). Remove nut (65) and
washer (66).
(6) Remove adapter (60) from servocylinder (9).
ad. Measure and record distance A between cen-
ter of rod end bore (67) and top of servocy-
linder piston rod (68). Keep recorded
measurement for installation of new servocy-
linder.
GO TO NEXT PAGE
9
64
61
62
59
66
65
M04-794-14
60
63
A
67
68
M04-794-16