TM 1-1520-238-23
7-232
Change 5
7.55.
SERVOCYLINDER UNIVERSAL LINK REPLACEMENT (AVIM) – continued
7.55.3. Removal
a. Remove universal link (1) from servocylinder
clevis (2).
(1) Remove and discard pin (3) and collar (4)
(TM 1-1500-204-23).
(2) Remove cap (5).
(3) Remove and discard retaining ring (6).
(4) Remove pin (7) from clevis (2) and link (1).
(5) Remove and discard link (1).
7.55.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
7.55.5. Inspection
a. Check removed and attaching parts for nicks
and gouges (para 7.1).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check universal link bushing for radial play.
(1) Maximum radial bushing play 0.005 INCH.
d. Check universal link bushing for wear.
(1) Maximum inside diameter 0.754 INCH.
e. Check servocylinder clevis bushing for wear.
(1) Maximum inside diameter 0.754 INCH.
f. Check servocylinder pin for wear.
(1) Minimum outer diameter 0.748 INCH.
GO TO NEXT PAGE
M04-2649-1B
4
7
2
1
6
5
3
LONGITUDINAL LINK SHOWN
