TM 1-1520-238-23
Change 3 9-10.1/(9-10.2 blank)
9.1.
POWER GENERATION AND DISTRIBUTION COMPONENTS INSPECTION – continued
CAUTION
To avoid damage to battery connector,
inspection insert gauge must be inserted
and withdrawn in a straight line.
q. Check battery connector helixes for minimum
withdrawal force.
(1) Insert inspection insert gauge in each helix to
a depth of 0.437 INCH using 0.385 INCH di-
ameter end of inspection gauge. Use inspec-
tion insert gauge (figure D-452, App D),
scale, and wire (item 222, App F).
(2) Fit shall be snug with required force to re-
move greater than ONE POUND. If less than
ONE POUND, replace connector.
(3) Insert inspection insert gauge in each helix to
a depth of 0.437 INCH using 0.370 INCH di-
ameter end of inspection gauge. Use inspec-
tion insert gauge (figure D-452, App D),
scale, and wire (item 222, App F).
(4) Fit shall be snug with required force to re-
move greater than ONE POUND. If less than
ONE POUND, replace connector.
END OF TASK
M04-4503-1
SCALE
WIRE
INSPECTION
GAGE
HELIXES
