TM 1-1520-238-23
9-23
9.6.
PILOT CIRCUIT BREAKER PANEL EDGE LT PNL ON/OFF SWITCH REPLACEMENT continued
b. Detach wires (8) from switch S1 (9).
(1) Identify wires (8).
(2) Remove two screws (10), washers (11), and
four terminal lugs (12).
c. Remove switch (9) from panel (2).
(1) Remove nut (13) and washer (14).
(2) Remove switch (9) and lockring (15).
(3) Discard switch (9).
9.6.4. Cleaning
a. Wipe removed and attaching parts with a clean
rag.
9.6.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.1).
b. Check wires for wear, cuts, breaks, and dam-
aged terminal lugs (para 9.1).
c. Check removed and attaching parts for corro-
sion (para 1.49).
GO TO NEXT PAGE
11
13
14
15
2
9
8
12
10
M04-1314-4
8
12