TM 1-1520-238-23
9-87
9.24.
ELECTRICAL POWER DISTRIBUTION BOX POWER TRANSFORMER T1 OR T2 REPLACEMENT
(T701-GE-701) – continued
9.24.3. Removal
a. Remove transformer (1) from support (2).
(1) Remove screw (3) and washer (4).
(2) Remove transformer (1).
NOTE
Wires for transformer T1 are attached to
A402TB3-14 and wires for transformer
T2 are attached to A402TB3-15.
b. Identify and depin wires (5) and (6).
(1) Identify and depin four wires (5) from terminal
block (7) (TM 55-1500-323-24).
(2) Identify and depin two wires (6) from splices
(8) (TM 55-1500-323-24).
c. Remove and discard transformer (1).
9.24.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
9.24.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.1).
b. Check electrical terminals for damaged
threads and loose mounting (para 9.1).
c. Check wiring for wear, cuts, breaks, cracked,
broken, or burned insulation (para 9.1).
d. Check removed and attaching parts for corro-
sion (para 1.49).
GO TO NEXT PAGE
1
2
4
3
M04-4522-3
7
5
6
8
M04-4522-4
