TM 1-1520-238-23
Change 6 9-93
9.26.
AC GENERATOR NO. 1 REMOVAL/INSTALLATION continued
d. Remove four wires (6) from generator (2).
(1) Identify wires (6).
(2) Remove four locknuts (7) and terminal lugs
(8) from studs (9).
(3) Remove wires (6).
e. Detach connectors P3 (10) and P2 (11) from
generator (2).
(1) Detach connector P3 (10) from receptacle J1
(12).
(2) Detach connector P2 (11) from receptacle J2
(13).
f. Remove three wires (6), wire harness (13.1),
and clamp block (13.2).
(1) Remove two screws (13.3), two washers
(13.4), and top half of clamp block (13.2).
(2) Remove three wires (6), wire harness (13.1),
and bottom half of clamp block (13.2).
GO TO NEXT PAGE
2
13
12
11
M04-1089-4A
7
9
8
10
6
6
6
6
13.1
13.2
13.3
M04-1089-13
13.4