TM 1-1520-238-23
9-108
9.29.
ELECTRICAL TEST PANEL BOX REMOVAL/INSTALLATION – continued
9.29.4. Cleaning
a. Wipe test panel mounting area with a clean
rag.
9.29.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.1).
b. Check wiring for wear, breaks, cracks, and
damaged terminal lugs (para 9.1).
c. Check removed and attaching parts for corro-
sion (para 1.49).
9.29.6. Installation
a. Install test panel (1) on support (2).
(1) Position test panel (1) on support (2).
(2) Install four screws (4) and washers (5).
(3) Install wire harness (3) in test panel (1).
b. Perform electrical bond check on attaching
hardware (TM 55-1500-323-24).
(1) Bond shall be 0.1 OHM or less. Use
ohmmeter.
c. Inspect (QA).
d. Attach electrical test panel circuit breaker
wires (para 9.28).
END OF TASK
1
3
2
5
4
M04-4200-3
