TM 1-1520-238-23
9-146.2
Change 7
9.41A.
BATTERY CHARGER FILTER REMOVAL/INSTALLATION – continued
9.41A.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.1).
b. Check wires for wear, cuts, and breaks (para
9.1).
c. Check removed and attaching parts for corro-
sion (para 1.49).
9.41A.6. Installation
a. Install battery charger filter assembly (10).
(1) Position battery charger filter assembly (10).
(2) Install four screws (5), washers (6), standoffs
(7), lockwashers (8), and nuts (9) to battery
charger filter assembly (10).
(3) Connect P2732 (3) to J1 (4) of the battery
charger filter assembly (10).
(4) Connect wire (1) to P80 pin H and wire (2) to
P80 pin W on Battery Charger.
b. Inspect (QA).
GO TO NEXT PAGE
