TM 1-1520-238-23
9-197
9.57.
AFT AVIONICS BAY DISTRIBUTION BOX DISASSEMBLY/ASSEMBLY – continued
i. Remove receptacle (A323)J7 (25) from box (4).
(1) Identify and depin wires (26) from receptacle
(25) (TM 55-1500-323-24).
(2) Hold four nuts (27). Remove four screws (28)
and washers (29).
(3) Remove four nuts (27) and receptacle (25).
j. Remove
terminal
junction
modules
(A323)GS1 (30), (A323)GS2 (31), (A323)GS3
(32), and (A323)GS4 (33) from box (4).
(1) Identify and depin wires (34) from modules
(30),
(31),
(32),
and
(33)
(TM 55-1500-323-24).
(2) Remove sealant. Use spatula set.
(3) Remove nut (35) and washer (36).
(4) Remove modules (30), (31), (32), and (33).
k. Remove terminal junction module (A323)GS5
(37) from box (4), if installed.
(1) Identify and depin wires (38) from module
(37) (TM 55-1500-323-24).
(2) Remove nut (39) and washer (40).
(3) Remove module (37).
GO TO NEXT PAGE
M04-4202-9
4
28
29
25
27
26
M04-4202-10
30
31
32
33
35
36
4
34
M04-4202-11
4
37
39
40
38
