TM 1-1520-238-23
9-200
9.57.
AFT AVIONICS BAY DISTRIBUTION BOX DISASSEMBLY/ASSEMBLY – continued
9.57.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.1).
b. Check receptacle and terminals for damage
(para 9.1).
c. Check wires for wear, cuts, breaks, and
burned insulation (para 9.1).
d. Check nutplates for damage (para 9.1).
e. Check removed and attaching parts for corro-
sion (para 1.49).
9.57.6. Assembly
NOTE
Quantity of hardware may vary.
a. Install three mounts (53) on box (4).
(1) Install screw (54) through mount (53) and box
(4).
(2) Hold screw (54). Install washer (56) and nut
(55).
b. Install wire harness W642 (41) in box (4).
(1) Install receptacle (A323)J8 (51).
(a) Install receptacle (51) on box (4).
(b) Install two screws (43) through recep-
tacle (51), four washers (45), and two
adapter nuts (44). Use socket head key
set.
(2) Install receptacle (A323)J6 (50).
(a) Install receptacle (50) on box (4).
(b) Install two screws (43) through recep-
tacle (50), four washers (45), and two
adapter nuts (44). Use socket head key
set.
GO TO NEXT PAGE
M04-4202-15
4
53
54
55
56
53
53
M04-4202-16
44
45
51
41
4
50
43
