TM 1-1520-238-23
9-202
9.57.
AFT AVIONICS BAY DISTRIBUTION BOX DISASSEMBLY/ASSEMBLY – continued
c. Install terminal junction module (A323)GS5
(37) on box (4), if removed.
(1) Install module (37) through box (4).
(2) Install washer (40) and nut (39).
(3) Perform electrical bond check on attaching
hardware (TM 55-1500-323-24).
(a) Bond shall be 0.0025 OHM or less. Use
ohmmeter.
(4) Edge seal module (37). Use sealing
compound (item 175, App F).
(5) Pin identified wires (38) in module (37)
(TM 55-1500-323-24).
d. Install terminal junction modules (A323)GS1
(30), (A323)GS2 (31), (A323)GS3 (32), and
(A323)GS4 (33) on box (4).
(1) Install modules (30), (31), (32), and (33)
through box (4).
(2) Install washers (36) and nuts (35).
(3) Perform electrical bond check on attaching
hardware (TM 55-1500-323-24).
(a) Bond shall be 0.0025 OHM or less. Use
ohmmeter.
(4) Edge seal modules (30), (31), (32), and (33)
and nuts (35). Use sealing compound
(item 175, App F).
(5) Pin identified wires (34) in modules (30), (31),
(32), and (33) (TM 55-1500-323-24).
GO TO NEXT PAGE
M04-4202-18
4
37
39
40
38
M04-4202-19
30
31
32
33
35
36
4
ROTATED
