TM 1-1520-238-23
9-239
9.67.
PILOT EXT LT/INTR LT PANEL RESISTOR R4 OR R6 REPLACEMENT (AVIM) – continued
9.67.3. Removal
a. Remove component board A2 (1) from pilot
EXT LT/INTR LT panel (2).
(1) Remove three screws (3), lockwashers (4),
and washers (5).
(2) Remove board (1) and three spacers (6).
b. Remove component board A1 (7) from four
tube assemblies (8).
(1) Remove screw (9), lockwasher (10), and
washer (11) from tube assemblies (8).
(2) Position board A1 (7) to gain access to resis-
tor (12).
WARNING
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions when
using soldering iron. If injury occurs,
seek medical aid.
c. Remove resistor (12) from two terminals (13).
(1) Desolder resistor (12) from terminals (13).
Use soldering iron (TM 55-1500-323-24).
(2) Remove and discard resistor (12).
GO TO NEXT PAGE
3
4
1
6
5
2
M04-5084-2
8
11
9
M04-5084-3
10
7
VIEW ROTATED
12
13
13
