TM 1-1520-238-23
9-236
9.66.
PILOT EXT LT/INTR LT PANEL RESISTOR R1, R2, R3, R7, R8, OR R9 REPLACEMENT
(AVIM) – continued
9.66.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
9.66.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.61).
b. Check wires and terminals for wear, cracks,
and cuts (para 9.61).
c. Check removed and attaching parts for corro-
sion (para 1.49).
9.66.6. Installation
WARNING
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions when
using soldering iron. If injury occurs,
seek medical aid.
a. Install new resistor (7) on board A2 (1).
(1) Position resistor (7) on board (1).
(2) Install two screws (9) through resistor (7),
board (1), washers (10), and nuts (11).
(3) Solder identified wires (8) on resistor (7). Use
soldering iron and solder (item 189, App F)
(TM 55-1500-323-24).
GO TO NEXT PAGE
11
9
10
M04-1389-7
7
8
1
