TM 1-1520-238-23
9-237
9.66.
PILOT EXT LT/INTR LT PANEL RESISTOR R1, R2, R3, R7, R8, OR R9 REPLACEMENT
(AVIM) – continued
b. Install new resistor (7) on board A1 (12).
(1) Position resistor (7) on board (12).
(2) Install two screws (9) through washers (10)
and resistor (7) into board (12).
(3) Solder identified wires (8) on resistor (7). Use
soldering iron and solder (item 189, App F)
(TM 55-1500-323-24).
c. Install board A2 (1) on panel (2).
(1) Position spacers (6) on board A1 (12).
(2) Position A2 (1) on spacers (6).
(3) Install three screws (3) through lockwashers
(4), washers (5), board (1), spacers (6), board
(12), and into tube assemblies (13).
d. Inspect (QA).
END OF TASK
M04-1389-5
9
10
7
8
12
VIEW
ROTATED
2
3
6
12
13
5
M04-1389-6
1
4
