TM 1-1520-238-23
Change 1 9-287
9.77.
MULTICHANNEL DIMMING CONTROLLER CHASSIS DISASSEMBLY/ASSEMBLY
(AVIM) – continued
CAUTION
To prevent damage to multichannel dim-
ming controller, exercise care when han-
dling controller chassis and internal
components. Ensure that work area is
clean and that parts are placed on a soft
and adequately protected working surface.
9.77.3. Disassembly
a. Remove handle (1) from chassis front panel
(2).
(1) Remove two screws (3), lockwashers (4),
washers (5), and ferrules (5.1) from handle
(1).
(2) Remove handle (1) from panel (2).
b. Remove rear panel (6) from chassis base (7).
(1) Remove four screws (8) from bottom of base
(7).
(2) Remove two screws (9) from bottom of base
(7).
(3) Slide panel (6) off base (7).
c. Remove two alinement pins (10) and brackets
(11) from panel (6).
(1) Remove nut (12), lockwasher (13), and washer
(14) from pins (10).
(2) Remove bracket (11) from panel (6).
(3) Remove pins (10) from panel (6).
GO TO NEXT PAGE
M04-4208-2A
3
1
2
4
5
5.1
M04-4208-3
6
8
9
7
M04-4208-4
12
1314
10
11
6
