TM 1-1520-238-23
Change 1 9-335
9.92.
FORMATION LIGHT REMOVAL/INSTALLATION – continued
NOTE
Step c is typical for left and/or right wing
formation light.
c. Remove wing tip formation light (1).
(1) Open access door LW8 or RW8 (para 2.2).
(2) Identify and depin two wires (2) from splices
(3) (TM 55-1500-323-24).
(3) Remove six screws (4) and washers (4.1).
(4) Remove light (1).
(5) Remove gasket (5).
d. Remove fuselage formation light (6).
(1) Removc fairing T355 (para 2.2).
(2) Identify and depin two wires (7) from splices
(8) (TM 55-1500-323-24).
(3) Remove two wires (7) from tie mount blocks
(9).
(4) Pull wires (7) through two grommets (10).
(5) Remove six screws (11) and washers (11.1).
(6) Remove light (6).
(7) Remove gasket (12).
GO TO NEXT PAGE
M04-1247-2A
1
4
3
2
5
4.1
10
M04-1247-3A
11
9
12
9
8
6
7
11.1
