TM 1-1520-238-23
Change 2 9-339
9.93.
TAIL OR WING NAVIGATION LIGHT REMOVAL – continued
c. Remove lens (1) and gasket (2) from naviga-
tion light base (3).
(1) Remove screw (4) and two washers (5).
(2) Remove lens (1) and gasket (2).
d. Remove light base (3) from wing tip (6).
(1) Remove three screws (7) and washers (8).
(2) Remove light base (3).
e. Remove nut (9) from light base (3).
(1) Remove nut (9) with spring (10) from base
(3).
f. Remove plate (11) and clinch nut (12) from
base (3).
NOTE
Steps g. thru j. are for tail navigation light.
g. Enter pilot station (para 1.56). Observe all
safety precautions.
h. On pilot center circuit breaker panel, open LT
NAV circuit breaker.
i. Remove tail navigation light adapter (13) from
vertical stabilizer (14).
(1) Remove three screws (15) from adapter
mount (16) and adapter (13).
(2) Pull adapter (13) clear of mount (16).
GO TO NEXT PAGE
8
M04-1245-2
11
12
3
10
9
6
7
2
1
5
4
15
16
13
14
M04-1245-3A
