TM 1-1520-238-23
9-406
9.111.
PILOT CAUTION/WARNING PANEL FIXED CAPACITOR C1, C2, C3, OR C4 REPLACEMENT
(AVIM) – continued
9.111.3. Removal
WARNING
Discharge all capacitors by ground-
ing prior to removal. Capacitors can
hold an electrical charge and create a
dangerous potential for electrical
shock. If injury occurs, seek medical
aid.
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions
when using soldering iron. If injury
occurs, seek medical aid.
CAUTION
Capacitors (A106)C1, (A106)C2, (A106)C3,
and (A106)C4 are polarized electrolytic ca-
pacitors. Prior to removal, identify each ca-
pacitor lead to ensure correct polarity during
installation. Accidental polarity reversal will
damage capacitor and/or other internal
components of pilot caution/warning panel.
a. Remove capacitor (1) from capacitor mount-
ing clip (2).
(1) Identify and desolder capacitor leads (3) from
harness wires (4). Use soldering iron
(TM 55-1500-323-24).
(2) Remove and discard capacitor (1) and at-
tached sleeves (5).
GO TO NEXT PAGE
M04-4218-1
C1
C3
C2
C4
3
3
4
M04-4218-2
1
2
5
4
