PILOT CAUTION/WARNING PANEL FIXED CAPACITOR C1, C2, C3, OR C4 REPLACEMENT
a. Clean capacitor mounting clip and harness wires. Use isopropyl alcohol (item 106, App F), brush (item 34,
App F), and cloth (item 52, App F).
a. Check for cracks. None allowed.
b. Check removed and attaching parts for damage (para 9.104).
c. Check removed and attaching parts for corrosion (para 1.49).
d. Check for sharp bends, distortion, and deformation (para 9.104).
e. Check for security of attachment and loose mounting (para 9.104).
f. Check adjacent wiring and wire bundles for cracked, broken, or burned insulation (para 9.104).
g. Check adjacent wiring and wire bundles for missing or broken tie wraps, chafing, wear, cuts, and
breaks (para 9.104).
h. Check adjacent capacitors and other electronic components for visible damage due to overheating and/or
short circuit (para 9.104).
i. Check for excessive deposits of dust or foreign matter anywhere inside pilot caution/warning panel
housing. None allowed.
GO TO NEXT PAGE