TM 1-1520-238-23
9-410
9.112.
PILOT CAUTION/WARNING PANEL FIXED WIRE RESISTOR R1 REPLACEMENT
(AVIM) – continued
9.112.3. Removal
WARNING
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions when
using soldering iron. If injury occurs,
seek medical aid.
a. Remove fixed wire resistor (A106)R1 (1) from
pilot caution/warning panel housing (2).
(1) Identify and desolder wires (3) from resistor
(1). Use soldering iron (TM 55-1500-323-24).
(2) Remove two screws (4), nuts (5), and lock-
washers (6) from resistor (1) and housing (2).
(3) Remove resistor (1).
GO TO NEXT PAGE
M04-4219-1
3
5
2
1
6
4
M04-4219-2
