TM 1-1520-238-23
9-490 Change 3
9.132.
PILOT W220 OR CPG W219 MICROPHONE WIRE HARNESS
DISASSEMBLY/ASSEMBLY continued
WARNING
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions when
using soldering iron. If injury occurs,
seek medical aid.
c. Remove plug assembly (10) from cable pair
(13).
(1) Remove backshell (14) from plug end (15).
(2) Remove heat shrink tubing (16) from two
wires (17) and drain wire (18).
(3) Identify and desolder two wires (17) and drain
wire (18) from plug end (15). Use soldering
iron (TM 55-1500-323-24).
(4) Remove plug end (15) and backshell (14)
from cable pair (13).
d. Remove jack assembly (11) from cable pair
(19).
(1) Remove backshell (20) from jack end (21).
(2) Remove heat shrink tubing (22) from two
wires (23) and drain wire (24).
(3) Identify and desolder two wires (23) and drain
wire (24) from jack end (21). Use soldering
iron (TM 55-1500-323-24).
(4) Remove jack (21) and backshell (20) from
cable pair (19).
GO TO NEXT PAGE
M04-4235-3A
14
17
18
16
15
13
10
M04-4235-4A
20
23
24
22
21
19
11
