TM 1-1520-238-23
10-248
10.49.
AFT FUEL CELL REMOVAL – continued
WARNING
High pressure air exists. Air pressure
from the pneumatic vacuum cleaner
shall be vented and the regulator gage
indicate 0 psi before disconnecting
regulator. Failure to do so could cause
death or serious injury. Observe all
safety precautions.
(10) Turn knob (58) counterclockwise until 0 psi is
indicated on gage (59).
(11) Remove pressure filler (57) from plug (49).
v. Remove plate (44) from fuel cell access cover
mounting pad (45).
(1) Remove 24 bolts (46) and washers (47).
(2) Remove cover plate (44).
w. Remove plate (40) from pad (41).
(1) Remove four bolts (42) and washers (43).
(2) Remove plate (40).
GO TO NEXT PAGE
M04-1914-44
58
52
59
M04-1914-27
44
45
46
47
M04-1914-31
42
43
40
41
