TM 1-1520-238-23
10-592
10.138.
AUXILIARY FUEL TANK KIT (TWO TANK) REMOVAL – continued
NOTE
Reinstall bolts, nuts, and washers that
were removed and retained when brack-
et was installed.
f. Install retained attaching hardware through
pylon (11).
(1) Install two bolts (18) through two washers
(19) and pylon (11).
(2) Install bolt (20) through washer (21) and py-
lon (11).
(3) Hold two bolts (18). Install washers (19) and
nuts (22) on bolts (18).
(4) Hold bolt (20). Install washer (21) and nut
(23) on bolt (20).
(5) Seal heads of bolts (18) and (20). Use sealing
compound (item 177, App F).
g. Remove hose (24).
(1) Remove nut (25) and washer (26).
(2) Remove clamp (27) from bracket (28).
(3) Remove clamp (27) from hose (24).
(4) Hold elbow (29). Remove nut (30).
(5) Remove screw (31), washer (32), and brack-
et (28) from outboard side of pylon (11).
h. Remove hose (33).
(1) Remove screw (34), washer (35), and clamp
(36) from inboard side of pylon (11).
(2) Remove clamp (36) from hose (33).
(3) Hold elbow (37). Remove nut (38).
GO TO NEXT PAGE
M04-3485-13
18
19
19
22
19
11
18
19
21
21
23
20
22
M04-3485-5
31
27
32
11
37
29
36
34
35
33
30
38
24
28
25
26
