TM 1-1520-238-23
11-66
Change 3
11.9.
LONGITUDINAL AND COLLECTIVE BELLCRANKS REMOVAL/INSTALLATION – continued
c. Remove bellcrank (1) and bellcrank (2).
(1) Support bellcrank (1).
(2) Support bellcrank (2).
(3) Remove sealant from attaching hardware
(para 1.47).
(4) Press retention device (7).
(5) Remove bolt (5) and washer (15).
(6) Press retention device (13).
(7) Remove bolt (11), washer (15), and washer
(16).
(8) Remove bellcranks (1) and (2).
(9) Remove bushing (17) and bearing (18) from
bellcrank (1).
(10) Remove bushing (19) and bearing (20) from
bellcrank (2).
11.9.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.9.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.5).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.5).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
M04-1727-4A
15
5
11
15
1
16
2
7
13
1
18
2
M04-1727-7B
20
17
19
