TM 1-1520-238-23
11-200
Change 6
11.40.
CPG COLLECTIVE STICK CYLINDER REMOVAL/INSTALLATION – continued
11.40.3. Removal
a. Remove cylinder (1) from arm (2).
(1) Remove and discard cotter pin (3).
(2) Remove nut (4).
(3) Remove bolt (5) and washer (6).
b. Remove cylinder (1) from bracket (7).
(1) Remove and discard cotter pin (8).
(2) Remove nut (9).
(3) Remove bolt (10), washer (11) and bushing
(12).
11.40.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.40.5. Inspection
a. Check removed and attaching parts for cracks
(para 11.5).
b. Check removed and attaching parts for dam-
age (para 11.5).
c. Check removed and attaching parts for corro-
sion (para 1.49).
d. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.5).
e. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
M04-1736-3
1
3
4
6
5
2
M04-1736-4
10
11
12
7
1
8
9
