TM 1-1520-238-23
Change 3
11-203
11.41.
CPG COLLECTIVE STICK SUPPORT REMOVAL/INSTALLATION continued
11.41.3. Removal
a. Remove CPG collective push-pull rod end (1)
from collective support (2).
(1) Remove and discard cotter pin (3).
(2) Remove nut (4).
(3) Remove bolt (5), washer (6), and bushing (7).
(4) Remove rod end (1).
b. Remove brake line (8).
(1) Remove clamp screw (9) and two brake line
nuts (10).
(2) Remove brake line (8).
c. Detach connector (A334)P1 (11) from recep-
tacle J268 (12).
CAUTION
To prevent damage to flight controls or
airframe structure, hold collective support
when removing attaching hardware. Fail-
ure to do so may allow support to fall as
fourth nut is removed.
d. Remove support (2) from airframe (13).
(1) Remove four nuts (14) and washers (15).
(2) Remove four bolts (16) and washers (17).
(3) Remove support (2).
GO TO NEXT PAGE
8
9
6
4
1
5
3
8
10
M04-3459-1
10
2
7
M04-3459-2
12
11
M04-3459-3
2
15
14
16
17
13